Epygi Quadro M26x Guida di Installazione Scaricare il pdf (Pagina 11)

QuadroM8L/M26x Manual I: Installation Guide Step 1: Installing the Quadro

LAN/WAN Connection Options

•

A QuadroM8L/M26x IP PBX with an Ethernet WAN port behind a router, which is

connected to a cable or xDSL modem. IP phones are placed on the WAN side of

the QuadroM8L/M26x.

Fig. I-5: Configuration: QuadroM8L/M26x behind a router with IP phones on WAN

In this and the following configuration (Fig. I-5 and Fig. I-6), the IP router typically acts as a

DHCP server for the LAN and assigns the IP addresses to the PCs and other devices. The

Quadro can be connected through its WAN port directly to one of the router's LAN ports

and will get an IP address from the router. By default, the Quadro acts as a DHCP client on

the WAN port. The IP phones are placed on the WAN side of the QuadroM8L/M26x, con-

nected to the company LAN.

The Admin PC can be connected to the Quadro LAN or WAN port to access the Web Man-

agement of the Quadro.

Please note: Since Quadro uses STUN by default, it will work with most basic routers

without any further configuration.

• A QuadroM8L/M26x IP PBX with an Ethernet WAN port behind a router, which is

connected to a cable or xDSL modem. IP phones are placed on the LAN side of

the QuadroM8L/M26x.

Fig. I-6: Configuration: QuadroM8L/M26x behind a router with IP phones on LAN

This configuration (Fig. I-6) is identical to the previous configuration, with the difference that

QuadroM8L/M26x; (SW Version 5.2.x) 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 42 43

Nessun commento

Epygi Quadro M26x Guida di Installazione Pagina 11